Lightwave offers several systems to help meet your budget, and your creative requirements.
Our laserists work side by side with your lighting team to insure the best possible visual experience.

Lightwave owns over 30 Lasers.  Every laser is warehoused in our Pittsburgh, PA location for immediate
delivery to your show location.  Never worry about equipment availability for your shows again!

 NOTE:  Some images depict International performances, using effects not legal in the USA

System 1:    300 mW Air-Cooled
                             FULL COLOR Argon / HeNe Tandem Pair

        Even our smallest projectors are packed with features.  A multiline Argon laser is color combined
with a high powered HeNe laser, and modulated by a state-of-the art AOM's (Acousto Optic Modulators).
These crystal devices allow full color control of the laser, allowing full reproduction of the  entire visible
spectrum - Red thru Violet.  The beam is then directed to a pair of Cambridge scanners capable of 
projecting over 50,000 points per second. This allows for the most detailed of graphics to be projected 
onto a screen in the venue, or a transparent  'scrim' that causes the image to appear to float in true 3D
above the audience.

REQUIREMENTS:   30 Amps, 110VAC -- Air Cooled, No water required!

System 2:     6 Watt Water Cooled
                     FULL COLOR Argon / Krypton (Mixed Gas)
                     TRILLIONS OF COLORS!

    Our most popular system!  A state-of-the art Coherent Purelight Star is color modulated by an 8-Channel
NEOS PCAOM, producing TRILLIONS OF COLORS.  Each projector features Cambridge Scanners, for
the most detailed graphics and animation possible.

REQUIREMENTS:    

     Power:   40 AMPS Per Leg, 208 Volt 3-Phase with no 'Wild Leg'
    Water:    Hose Connection delivering 4 Gallons per minute, and drain  (Optional chillers available)

System 3:  12 Watt Water Cooled
                  Argon / Krypton Tandem Pair

    For higher profile events, nothing can match the intense color saturation of an Argon / Krypton pair.  This system
uses two separate lasers which are color combined, and modulated by AOM.  This projector features two scan
systems for simultaneous projection of scanned beams and graphics.  In addition, it also features a 10 position beam
table to accommodate external bounce mirrors.  Two beam positions may be substituted for fiber optic launchers,
which allows two additional scanners to be mounted in remote locations of the room.

REQUIREMENTS:    

     Power:   80 AMPS Per Leg, 208 Volt 3-Phase with no 'Wild Leg'
    Water:    Hose Connection delivering 4 Gallons per minute, and drain  (Optional chillers available)

System 4:  20 Watt Water Cooled
                  Argon / Krypton Large Frame Laser
                  Ultimate color, power, and options.

(Images not yet posted!!   Coming very soon!)

     This system uses a large frame Argon / Krypton laser for the ultimate in color palette and saturation.
This laser consumes enough energy to power an average residential block.   In addition, it also features a 
10-position beam table to accommodate external bounce mirrors.  Two beam positions may be substituted 
for fiber optic launchers, which allows two additional scanners to be mounted in remote locations of the room. 

 More details and images coming soon!

REQUIREMENTS:    

     Power:  100 AMPS Per Leg, 480 Volt 3 Phase   -or-
                  200 AMPS Per Leg, 208 Volt 3-Phase with no 'Wild Leg'   (Using optional step-up transformer)
    Water:    Hose Connection delivering 6 Gallons per minute, and drain 

System 4:  40 Watt Water Cooled
                  Nd:YAG, Q-Switched or CW
                  BIG BRIGHT BEAMS!

   For outdoor shows, nothing can match the raw power of a YAG laser.  More info and pictures coming soon!   

REQUIREMENTS:    

     Power:  40 Amps, 208-240VAC Single Phase                 
    Water:    Hose Connection delivering 1 Gallon Per minute  (Chiller Available)